NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Rbr50 no internet connection issue
Getting following issues every time I enter home. WiFi does not connect itself and when I try explicitly it shows me WiFi but gives this message of no internet connection. I have installed this system...
What Firmware is currently loaded?
What is the Mfr and model# of the ISP modem the NG router is connected too?
Is the Orbi system operating in Router or AP mode?
What wireless devices are you having problems with?
What is the size of your home? Sq Ft?
What is the distance between the router and satellite(s)? 30 feet is recommended in between them to begin with depending upon building materials when wirelessly connected.
What channels are you using? Auto? Try setting manual channel 1, 6 or 11 on 2.4Ghz and any unused channel on 5Ghz.
Any Wifi Neighbors near by? If so, how many?
Try enabling Beamforming and MIMO(MIMO may or maynot be needed) and WMM. Under Advanced Tab/Advanced Settings/Wireless Settings
Try disabling the following and see:
Armor, Circle, Daisy Chain, Fast Roaming, IPv6 and Set 20/40Mhz Coexistence to 40Mhz only. Save settings and reboot the router and satellite(s).
Inboxsga wrote:
Getting following issues every time I enter home. WiFi does not connect itself and when I try explicitly it shows me WiFi but gives this message of no internet connection. I have installed this system just last week. Working fine with wired devices and other device always at home. Only issues is the phones as we move out and come back to WiFi.