RBSR0 Satellites showing No Connected Device Found after firmware update

Question

I have 2 Satelittes and a router throughout my 2 level home.&nbsp; And I have all my devices connecting to my router and none connecting to the Satallites after the lates Firmware update.&nbsp; v2.7.2.104.&nbsp; I have devices practically on top of the Satellites that won't connect and show a poor wifi signal.&nbsp; What is the issue?&nbsp;

vajim · Answer

jcrozat&nbsp;wrote:I have 2 Satelittes and a router throughout my 2 level home.&nbsp; And I have all my devices connecting to my router and none connecting to the Satallites after the lates Firmware update.&nbsp; v2.7.2.104.&nbsp; I have devices practically on top of the Satellites that won't connect and show a poor wifi signal.&nbsp; What is the issue?&nbsp;How do you know that your devices are connecting to your router?&nbsp;what are you looking at or checking?

jcrozat · Answer

I've verified in the Iphone App and I also logged into the gateway IP of the router via my web browser.&nbsp; I have close to 30 devices connected devices.

vajim · Answer

jcrozat&nbsp;wrote:I've verified in the Iphone App and I also logged into the gateway IP of the router via my web browser.&nbsp; I have close to 30 devices connected devices.Ok. &nbsp;Forget the app&nbsp;&nbsp;I too have seen recent screw ups with the pc login. Mine says one of my sats is disconnected. &nbsp; The last time this happened a simple reboot of all, modem and orbi and the problem went away. &nbsp;I may do that at some point, but for now all devices working and the sats have no rim color. &nbsp;if your devices are working I wouldn't worry but it's your blood pressure. &nbsp;

jcrozat · Answer

Just bugs me, the whole point of the Satellites is to spread the device load and improve signal strength.&nbsp; If devices are connecting to the wrong base station then that defeats the purpose and why did I spend the money on a mesh network?&nbsp; It appears to be a roaming issue, but of course we won't get those kind of details on a home solution such as this.

vajim · Answer

jcrozat&nbsp;wrote:Just bugs me, the whole point of the Satellites is to spread the device load and improve signal strength.&nbsp; If devices are connecting to the wrong base station then that defeats the purpose and why did I spend the money on a mesh network?&nbsp; It appears to be a roaming issue, but of course we won't get those kind of details on a home solution such as this.Perhaps...but until you know with 100% accuracy your worry may be in vain&nbsp;Try the reboot on all then check the pc login&nbsp;&nbsp;if that does not improve the situation try a factory reset on the whole system&nbsp;

Forum Discussion

RBSR0 Satellites showing No Connected Device Found after firmware update

9 Replies