NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

rhester72's avatar
rhester72
Virtuoso
Jul 11, 2017
Solved

Firmware V1.12.0.18 Discussion

This does indeed appear to be based on (identical to?) the last private beta V1.12.0.16 and has been released to the public.  Hope it helps!   Guest mode AP isolation finally works 100% over IPv4...
Features
Installation
Troubleshooting
  • martyfp's avatar
    martyfp
    Jul 11, 2017

    New Features and Enhancements:

    • Supports ReadySHARE Printer for Orbi devices that are equipped with a USB port
    • Updated the OrbiOS API to v3.14

    Bug Fixes:

    • Fixes the iOS disconnection issue.
    • Fixes the Dropcam disconnection issue.
    • Fixes the convergence issue when an Ethernet connected device moves from one Orbi to another. 
    • Fixes the issue where the Orbi app can’t find the Orbi router if the router is using IPv6 and is in AP mode.
    • Fixes the issue where the Orbi app can’t display more than 20 connected devices.
    • Fixes the issue where the installation assistant might not display if the device is connected to the Orbi network wirelessly.
    • Fixes the issue where the 2.4 GHz backhaul setting is disabled if the fronthaul MU-MIMO and TxBF is disabled.
    • Fixes the issue where IPv6 devices on the guest network can access the Orbi router’s web GUI.  
    • Includes security fixes for the following security vulnerabilities:

      PSV-2016-0133, PSV-2017-0607, PSV-2017-0615, PSV-2017-0736, PSV-2017-2190

    Download Link:

    RBR50 - http://www.downloads.netgear.com/files/GDC/RBK50/RBR50-V1.12.0.18.zip

    RBS50 - http://www.downloads.netgear.com/files/GDC/RBK50/RBS50-V1.12.0.18.zip

JAYSONE's avatar
JAYSONE
Star
Jul 11, 2017

Marshymallow,

 

Did as you suggested and actually unplugged both my orbi setup still the same at the moment...how long did it take for things to sort itself out?

 

I am in router mode and have two satellites. FWIW

marshymallow's avatar
marshymallow
Apprentice
Jul 12, 2017
JAYSONE wrote:

Marshymallow,

 

Did as you suggested and actually unplugged both my orbi setup still the same at the moment...how long did it take for things to sort itself out?

 

I am in router mode and have two satellites. FWIW

Actually all I did was Power Off then On the sat unit.

There will be white blinking light on the Sat for maybe a minute or so followed by contant blue.

I will then check router admin again and then i see the sat proper.

If it's unsuccessful for you, just do a router reset and setup the whole system again.