Setting up Orbi with LTE router

I have the Orbi WiFi router. I have a NETGEAR LB 1120 LTE modem. I’ve installed a t-mobile sim. The modem is making connection. I’ve set it to bridge mode. The Orbi has brief connection and then drop...

Installation

ekhalil

Master

Mar 01, 2019

TLI-mark wrote:

DNS server 29.142.169.1

Lease Obtained 1Days 6Hours, 0minutes

Lease expires 1Day, 5 hours, 58 Minutes

I suggest to do the following changes (if you want you can start with step 1 only first and see if it helps alone, if not then go for step 2 later):

1. Change the DNS to 8.8.8.8

2. Change the lease time to 1 hour as follows:

From browser go to the router's debug page (http://192.168.1.1/debug.htm). Use your router's IP address or http://orbilogin.com/debug.htm
Enter admin as user name and your router’s management password
Tick "Enable Telnet" option
Use Telnet to connect to your Router telnet 192.168.1.1 and enter admin and the same password as above
Enter the following commands:
root@RBR50:/# config get wan_lease — Should give you --> 86400 which means 24 hours
root@RBR50:/# config set wan_lease=3600 — 3600 means 1 hour
root@RBR50:/# config commit

TLI-mark

Tutor

Mar 01, 2019

I'm connected and holding. Orbi speed test is great. But when I use a browser on any device connected by wifi the speeds are so slow I can't even run a speed test.

I have changed the DNS to 8.8.8.8 as recommended (something I normally do)

I'm afraid I'm stuck on the telnet instructions. I have ticked the Enable telnet box, but not following the remainder of the instructions.

Forum Discussion

Setting up Orbi with LTE router