NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Trying to Set RBK50 in AP Mode with wired backhaul and have a few issues
I have been going at this for a couple of days now and I cannot seem to get this working. I am trying to setup my Orbi system in AP mode with a wired backhaul. 1st issue) I can get the Orbi in ...
You need to downgrade to v16 if you want ethernet backhaul to work:
What is the Mfr and model# of the ethernet switch in the configuration?
Be sure your using good quality LAN cable. CAT6 is recommended.
- TP-Link TL-SG116
BTW, I was never able to see the web gui indicate wired backhaul even connected directly to the AP with the cable provided by Netgear.So first off,
Ensure the RBS is using same version of FW and RBR.
Wirelessly connect the RBS to the RBR to ensure it connects then. If that happens, then use a good quality LAN cable and connect the RBS to the back of the RBR to see if it will connect. Top ring should turn BLUE. Status on the RBR may take a bit longer to update. Give it a few minutes.
IF the RBS gets connected wired, and status shows, then turn OFF the RBS then connect to the remote location. If the RBS fails to connect after the switch, then try a different switch. Your current switch has some green ethernet features that causes some problems for Orbi systems.
- I will try a few things and try to bypass the switch for the wired backhaul.