NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Netgear 810 update
Netgear 810 unlocked
I often check the device touch screen for a chance to get a new update to resolve the many issues I suffer from,but sadly nothing in the air ,wonder how netgear a networking company commit so silly mistake
I hope an urgent update looks the light the quickest way
I often check the device touch screen for a chance to get a new update to resolve the many issues I suffer from,but sadly nothing in the air ,wonder how netgear a networking company commit so silly mistake
I hope an urgent update looks the light the quickest way
The release is still on track for Mar 20.
Steve
187 Replies
- Already 2 weeks still not any news about follow up update....
Update version problems emerged with DC112A-100EUS too. Support page shows newer version. When I try to install, it says "incorrect version". Support page initial firmware version is different than the Cradle's base version. What comes to AC810-100EUS updates, couple of contact channels are open, but time span for solution is still unknown.
- It seems this community's forum is of another firm not for netgear
- Hong Kong netgear agent ask the United States about firmware update for two weeks still did not respond
- I got information that OTA firmware update should be available soon. So there is hope in the air.
from where did u get this info?
- From Netgear insider who works with AC810's , trustworthy source.
I am glad that the message has gone through. I first heard about this firmware version late November 2016, so I think beta-testing phase may be near its end because so much time has passed. So probably release date is near.
- We have same problem but my case some time when open ac810s will display cannot connect 127.0.0.1 and upload speed very slow I post the picture in the forum before
I have seen this "cannot connect 127.0.0.1" too.
kirayamto wrote:
We have same problem but my case some time when open ac810s will display cannot connect 127.0.0.1 and upload speed very slow I post the picture in the forum beforeSame problems, i forgot about this. As for upload speed, previously i had used Tp-link LTE Cat.4 router, upload was ~40 - 60 mbit/s without external antennas, same band (B7 20 MHz).
Another interesting question is about supporting CA_3-38 combination (FDD + TDD Aggregation). It is listed as supported, but looks like CA_3-38 disabled out of the box, so it is not possible to use this in real life.
QXDM: NV Browser > RF LTE > 70977 (RFNV LTE B3 CA BC CONFIG) /nv/item_files/rfnv/00025210. Default value is 524484, which means: B3 + B3, B3 + B7, B3 + B8, B3 + B20.
Screenshot: https://www.dropbox.com/s/td1jn9kqpq23j30/AC810-CA_3-38.PNG?dl=0
If there is another variable for FDD+TDD Aggregation, please excuse me. But i cant get CA_3-38 working.
- One addition to cell edge and 256-QAM experience. In my case it may be so that 256-QAM did not activate because BLER is over 10% threshold. I cannot see BLER from telnet interface. It would be highly useful to see BLER from UE side(without QXDM).
- About cell edge and 256-QAM: On the other hand it is strange if CQI 15 and BLER over 10% could exist same time. Could this be due to cell edge radio air condition or some problem with signal calculation results ?
TeeJay74 wrote:
About cell edge and 256-QAM: On the other hand it is strange if CQI 15 and BLER over 10% could exist same time. Could this be due to cell edge radio air condition or some problem with signal calculation results ?It's a very strange. Good question for Netgear engineers.
Personally i don't know. If so, CQI table for 256-QAM available here, but there is not so much information about interaction between CQI and Block Error Rate.
- For me many issues such as:
1 Annoying apn when powering in device
2 issue with orange tn data sim continued rebooting
3 sometimes detecting network take much time with the error can't connect to 127.0.0
4 the ios app for managing device lacks many features unlike the webpage
5 can't find option to fix the frequency to a specific band for ex 1800 only or 800 or 2600
6 support from netgear is totally absent - One more thing :)
Wired connection does not work on macOS. It does not matter which cable is used: USB2 or USB3.
Support has answered that USB connection is designed only for Windows. Veeeeery unexpected limitation for AirCard 810, especially taking into account that old AirCard 785 model can be connected to Mac either wirelessly or wired.
