NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Using DynDNS with LB1110
Hi all, I'm trying to connect an external router with the WAN port to the LB1110 Modem. Connection is only working, if I let the LTE Gateway in Router Mode. As soon as I change in Bridge Mode, my...
So you would recommend to reset the modem in order to get a working DHCP connection on the external router?
Yes, once you have the modem and router cabled up, reset the modem to ensure a DHCP lease is available for the router.
Note that I am assuming that APN setup / LTE data connection was already confirmed as working properly based on your comments about router mode.
In bridge mode, this has to be working properly in order to get an IP address from network to pass thru to router.
In router mode, even if LTE network connection not active, the router will still be able to acquire a local NAT'd IP address.
You can check the status of the LTE connection when in bridge mode from the WebUI (http://192.168.5.1).
Steve