Forum Discussion

Aspirant

Nov 13, 2019

DNS_CLI[50091332]: dns_client_util.c(1686) 298 %% DNS Client: no ipv4 or ipv6 address found in respo

Hi i have again problem with my M4100 (please see also my previous discussion here ) i get again the same message, please help me!

Aspirant

Nov 19, 2019

Hi DaneA, thanks for your reply.

Here follow my dns configuration:

DNS Status: Enabled

DNS Default Name: empty

Retry Number: 2

Response Time: 3

Source Interface: vlan1

DNS Server configuration have only one row:

Serial: 1, DNS Server 192.168.1.1 (my FritzBox gateway), Preference 0

You can view the complete network configuration in my previous post (there's a link in my first message of this thread)

Waiting for your reply, regards

Corrado

NETGEAR Employee Retired

Nov 21, 2019

Just want to verify. Kindly answer the questions below:

a. Is the M4100-D12G switch the DHCP server of all VLANs?

b. Is routing also configured on the M4100-D12G switch?

Regards,

DaneA

NETGEAR Community Team

attilay2k
Aspirant
Nov 22, 2019
hello DaneA , for both questions the answer is yes
attached to this my message 'u can see the routing table
DaneA
NETGEAR Employee Retired
Nov 25, 2019
attilay2k,

Thank you for your response. :)

Since the M4100-D12G switch the DHCP server of all VLANs, what is the DNS server configured on each DHCP pool?

Also, kindly get the tech support file from your M4100-D12G switch. As reference, read pages 411 of the M4100 user manual here. Then, kindly provide a download link (such as Goggle Drive link) for us to download it on our end (you may send the Google Drive link as private message to me).

The article below would also help on how to get the tech support file:

Get the tech support file from my Managed Switch.

Regards,

DaneA
NETGEAR Community Team
- attilay2k
  Aspirant
  Nov 25, 2019
  Hi DaneA
  DNS Server is always my Fritz 7590 (192.168.1.1) and it's configured for all the DHCP pools
  
  I'd just sent You a private message with a OneDrive shared folder in which 'u can upload Support Tech file
  
  Please note also that in the last period i have some problem like dhcp problems: seems that just SOME of my iPhones sometimes could not get an IP address from the DHCP (sometime they get 0.0.0.0 address, sometimes 169.x.x.x) but this pool (Telefoni) is made in the same mode of each other (Devices, Cameras, PCs, etc.) and other pools has no problem

Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!

Join Us!

Comprehensive support plans for maximum network uptime and business peace of mind.