M5300-52G3 11.0.0.37 firmware - SDM Question

Good Morning,

I'm in the process of upgrading all my switches and questions for some models.

I did read this on 11.0.0.37 :

SDM changes on M5300:

    Maximum number of allowed VLANs changed from 4K to 1K in the default SDM (dual-ipv4-and-ipv6 data-center-enterprise) mode. If M5300 with 10.0.0 firmware has more than 1K VLAN, update from 10.0 to 11.0 removes all configured VLANs. Workaround: Manually reconfigure VLANs after the update.
    The 4K VLAN is retained in SDM “Dual-ipv4-and-ipv6 enterprise” mode and “Ipv4-routing enterprise” mode.
    When using the SDM with multicast, the following features are not supported. Workaround: Use other SDM template.
        IP Source Guard
        DHCP Snooping
        Dynamic ARP Inspection

But I dont have the same SDM names in my switch, so I simply wanna be sure that the one I use is safe :)

Mine is currently IPV4 without Multicast, so I'm safe with the multicast part.

Also : The 1K vlan limit, does it means :

-the vlan list goes from 1 to 1024

or

-you can have 1024 vlans maximums (eeven with vlan id > 1024)

Thank you for your answer,