NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
oid to monitor psu
Hi, I am trying to monitor Temperature, Power supply status in Netgear M7100-24X switch thru nagios. I am able to get temp out from switch in nagios but not able to get data for power supply. th...
Hi amudhan,
Welcome to the community! :)
What is the current firmware version of the M7100-24X switch? You could download the respective MIB file that corresponds to the firmware version of the switch here.
Regards,
DaneA
NETGEAR Community Team
Hi DaneA,
My current firmware version is 11.0.0.12 and i have downloaded mibs file of same firmware, but i couldn't find information what i am looking for.
regards
Amudhan
Hi Amudhan
It should be 1.3.6.1.4.1.4526.10.43.1.7.
We can see the power module with this OID through NMS300.
Please select table to show this OID via NMS300, and let us know how it goes!
Regards,
Hi,
I have figured out oid, now i am getting below output.
check_snmp -H xx.xx.xx.xx -o .1.3.6.1.4.1.4526.10.43.1.7.1.3.1.0,.1.3.6.1.4.1.4526.10.43.1.7.1.3.1.1 -C xxxx -u 'PSU1,PSU2' -c @3:3,@3:3 -l "PSU status "
PSU status OK - 2 PSU1 2 PSU2 | iso.3.6.1.4.1.4526.10.43.1.7.1.3.1.0=2 iso.3.6.1.4.1.4526.10.43.1.7.1.3.1.1=2is this right?
I am beginer in monitoring switch thru snmp. so please help me on few basics.
Can you guide me how to browse mib files to find oid for an item. example temperature, psu, port Up or Down, ...
how do i confirm the oid is for the particular item monitoring.
regards
Amudhan P
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
