Routing M4300-8x8f

Question

Hi I'm new to netgear and our company plans to implement a few layer switch in our company network, I have been searching and figure out how to configure it on the switcher, now I stack at core switch routing problem, hopefully can get the solutions from here.

After add default route on core switch 0.0.0.0 0.0.0.0 10.10.10.2

PC_1 172.168.100.3 can ping 10.10.10.1, but add second default route 0.0.0.0 0.0.0.0 10.10.20.2, PC_2 172.168.200.9 cannot ping 10.10.20.1.

If I delete default route 0.0.0.0 0.0.0.0 10.10.10.1 then PC_2 172.168.200.9 can ping 10.10.20.1.

I try to delete all default route and add static route 10.10.10.0/24 10.10.10.2, 10.10.10.0/24 10.10.20.2, both PC cannot ping, may I know what is the issue? thank you.

DaneA · Answer

Yaw_Net,

&nbsp;

Welcome to the community! :)&nbsp;

&nbsp;

There might be a misconfiguration on the settings.&nbsp; It would be best that you to open a chat or support ticket with NETGEAR Support here at anytime.&nbsp;&nbsp;

&nbsp;

Otherwise, you may indicate here the settings configured in order for other community members to check it and post their recommendations and suggestions.&nbsp;