NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
RSPAN to vmware not working
Hello We have a stack of two M4300s. I want to span two LAG ports to RSPAN vlan and monitor this on destination on vmware distributed switch. I followed following video to set up vmware part....
No fix possible - this is very likely a imitation. A mirror port can't be a LAG.
Hello
On our other stack we have following working ok. Only difference is that destination is not RSPAN vlan, but physical port.
port-channel name lag 1 TO-FW01
interface 1/0/1
addport lag 1
exit
interface 2/0/1
addport lag 1
exit
port-channel name lag 2 TO-FW02
interface 1/0/2
addport lag 2
exit
interface 2/0/2
addport lag 2
exit
monitor session 1 destination interface 2/0/48
monitor session 1 source interface lag 1
monitor session 1 source interface lag 2
monitor session 1 mode
I changed config on problematic stack to following(to get some traffic from physical ports not LAG) and it's still not sending traffic to VLAN 1514.
vlan 1514
remote-span
monitor session 1 destination remote vlan 1514 reflector-port 1/0/48
monitor session 1 source interface 1/0/25
monitor session 1 source interface 2/0/25
monitor session 1 modeNETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
