NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
ACL in a stack - how to?
Hi all,
I have a stack of four M4300-12X12F. Some SFP+ and RJ45 ports are configured for stacking. Some other ports set up for LAG/LACP and the rest is used for direct connection to server hosts, firewall, phone system etc.
When creating ACLs I have to bind them to a port or VLAN to take effect. So let´s say I have VLAN10 (client and printer), VLAN20 (servers) and VLAN82 (security Wifi cameras). The goal is to allow VLAN10 to access VLAN20 and vice versa + Internet but access to VLAN82 is restricted to VLAN20 only.
How do I create and bind a rule to each VLAN? Do I create a rule set to each VLAN and bind to VLAN instead of port?
1 Reply
When creating ACLs I have to bind them to a port or VLAN to take effect.
How do I create and bind a rule to each VLAN? Do I create a rule set to each VLAN and bind to VLAN instead of port?The ACL should be binded to a port. Check the scenario on the article below:
VLAN Routing on Smart Switches - Read pages 4-5 about IP ACL on how its configured but it would be best to read the whole article on why IP ACL is configured.Regards,
DaneA
NETGEAR Community Team
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
