NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Can't login to ProSafe after firmware update 2.6.0.48
Hello Tech, 1. I received an email to update my switch firmware. 2. I installed the firmware 2.6.0.48 with no problem. I did not record the previous firmware number. 3. I opened my ProSafe Plus...
In the German forum the same problem is discussed. The 8-Port GS108Ev3 and the 16-Port GS116Ev2 are facing this problem. While local access to the Webgui from the same network seems to work at least mostly the access via VPN fails. So far there seems to be a problem with the MTU. If set to 1500 it is working and if smaller e.g. via VPN over the Internet the Webui is not reachable.
Possible work arounds: For GS108Ev3 a downgrade using the Prosafe Plus-Configurationutility 2.7.8 to firmware V2.06.10 and for GS116Ev2 to firmware V2.6.0.43
Unfortunately if a switch is not reachable with the Utility a downgrde is not possible. I'm facing this problem, too for one of my GS116Ev2. While i succeeded in downgrading my two GS108Ev3 to the preformer firmware version I'm not able to do the same for my GS116Ev3 on firmware V2.6.0.48. The switch is not even listed in the Utility. Obviously the last set fo updates provided from Netgear are not a big deal...
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
