NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
gs108v2 gs308ep DoS
I have both of those switches... The port turns off and has to be enabled to back on. The gs108v2 is connected to the gs308ep (poe is turned of on port 1 which connects to the gs108v2 port 1). Th...
Correct it's a smart switch not a fully managed switch... The model info I gave is correct also.
Thanks for the reply.
The model info I gave is correct
Are you sure you didn't mean the GS108eV2 or the GS108Tv2?
The GS108T has a control to disable DOS attacks, the GS108e doesn't (at least nothing in the manual)
It still happens when disable.
It still happens when disable.
I'm unclear on the topology.
It sounds like Router->gs108->gs308->Cisco AP
Is that right? What other stuff is connected?
Is everything on 192.168.2.x?
Everything is on the same network. Yes, that's the network topology. The network cable is a straight through cable from switch to switch.
Wireless printer has been disconnected and it still happens. It seems from searching, their are other cases of this happening on this forum and no real answer.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
