NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
GS110EMX and usage of the 10G ports
Hello,
I'm quite new in this switches field so I better ask than sorry...
I have 5 cameras with 1G ethernet interface and one with multi-gig interface (up to 10 GE..) and I'd like to record all of them simultaneously to a host with 10GE interface. can I use one of the 10G port of this switch to the 10G camera (streaming data), the others to ports 1~5 and the host to the second 10G port as uplink to host?
Another question, I'd like to synchronize all cameras via PTP (PTP server will be connected to port #6..) would that be a problem? is there a special switches family for that?
Appreciate your support!!
- Bandwidth might be OK, device temperatures can be an issue at a concurrent high load (that's a fanless switch). The no-go is the PTP requirement.
No non-managed, Smart Managed Plus and Pro switches, and even several managed switches can't handle PTP.
Read the reply by LaurentMa here -> https://community.netgear.com/t5/Smart-Plus-and-Smart-Pro-Managed/XS748T-IEEE-1588-Support/m-p/1903218
Please check this post
1 Reply
Replies have been turned off for this discussion
- Bandwidth might be OK, device temperatures can be an issue at a concurrent high load (that's a fanless switch). The no-go is the PTP requirement.
No non-managed, Smart Managed Plus and Pro switches, and even several managed switches can't handle PTP.
Read the reply by LaurentMa here -> https://community.netgear.com/t5/Smart-Plus-and-Smart-Pro-Managed/XS748T-IEEE-1588-Support/m-p/1903218
Please check this post
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
