GS310TP Vlan tagged untagged problem

---

schumaku wrote:

---

AtLecC wrote:

Router is on g7.

Router has VLAN tagged configured, with dedicated subnets for each VLAN (for now VLAN 4 and 10 as these are the ones causing a problem)?

Yes, router has dedicated vlans (couple of them) with subnets. Default subnet (without vlan tag from router) goes as vLan 4 on switch. but strangely it does not work on g1. Haven't tested rest of vLans.

---

schumaku wrote:

---

AtLecC wrote:

If i add vlan 10 to my computers network card i can access vlan on port g2.

---

This reads a little bit vague - you created  sub-interface on the computer, tagged to VLAN ID 10, and get DHCP on that sub-interface and/or can communicate on that subnet?

Yes, for testing porpuses i have hyper v virtual nics on my pc. One nic is without vLan ID, second one have vLan 10. 

With this i should be able to get untagged vLan 4 ip and tagged vlan 10 ip from dhcp.

But on g2 port only tagged vLan 10 is working. 

---

schumaku wrote:

 

As the VLAN config looks OK, I suspect more a problem on your router than on the switch.

I would think so too that it is router problem if i would not have similar working setups.