NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
GS728TP managment IP-adress leased through DHCP even if static address is configured
I have configured the switch to use static IP-address for managment using a separate VLAN, VLAN 123. The web gui is accessible through this IP-adress. For unknwon reason, the switch is leasing an ma...
Thanks for you suggestion. I solved it another way.
1. Changed managed VLAN id to 1.
2. Changed port to VLAN 1 and logged in, saw that default gateway field was empty. Inserted correct parameter and applied.
3. Changed back to original managed VLAN id
4. Problem solved.
I couldn't change to DHCP, got an error. But this did it
Thanks for you suggestion. I solved it another way.
1. Changed managed VLAN id to 1.
2. Changed port to VLAN 1 and logged in, saw that default gateway field was empty. Inserted correct parameter and applied.
3. Changed back to original managed VLAN id
4. Problem solved.
I couldn't change to DHCP, got an error. But this did it
Hi Erik-NA,
I'm glad that the problem is now resolved. :) I appreciate that you have shared the steps you did to solve the problem.
Feel free to post your future concerns here in the community.
Regards,
DaneA
NETGEAR Community Team
No, problem
I think this happened when configuring management after factory reset by changing all parameters at once, both static IP-address, gateway and VLAN Id.
I belive that the process should be to first set static IP-address and gateway and then apply and after that change VLAN Id.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
