Forum Discussion

Aspirant

Feb 08, 2017

Solved

Need to secure a GS110TP switch

Hi all We just got a GS110TP managed switch. We need it to recognize only a set of network devices and drop the rest. Trying to set MAC filtering but for some reason its not working and all devic...

Security

DaneA
Feb 26, 2017
@ramram,

I just want to follow-up on this. Were you able to access the article I've shared and used it as your reference guide? Also, were you able to try to configure Port Security on your GS110TP switch?

Regards,

DaneA

NETGEAR Community Team

ramram

Aspirant

Feb 08, 2017

It's 5.4.2.22

I still cant manage :((

JohnRo

NETGEAR Employee Retired

Feb 09, 2017

Hi ramram,

You can contact out support team so they can walk you through with creating MAC ACL. They should be able to guide you through.

Thanks,

JohnRo
NETGEAR Employee Retired
Feb 13, 2017
Hi ramram,

Were you able to talk to support regarding this one?

Thanks,
- ramram
  Aspirant
  Feb 13, 2017
  Yes still lost though...
  
  What I need is this setup:
  I WISH TO BE ABLE TO SET SWITCH TO 'RECOGNIZE' ONLY 2 COMPUTERS BY MAC. THESE 2 COMPUTERS SHOULD WORK ON ALL PORTS.
  IF I CONNECT OTHER PCs THEY SHOUDNT WORK ON ALL PORTS.
  Cant get it to work :(
  - Carl_z
    NETGEAR Expert
    Feb 14, 2017
    Hi ramram,
    
    Welcome to the Community!
    
    I think it it possible for you to achieve the goal by mac acl. Try with following steps
    
    1. Go to "ACL>ACL Wizard", select "ACl Based on Source MAC"
    
    2. Add rules
    
        rule 1   Permit source mac **********/00:00:00:00:00:00 (input pc1's mac)
    
        rule 2   Permit source mac **********/00:00:00:00:00:00 (input pc2's mac)
    
        rule 3   Deny    Match Every
    
    3. On binging Configuration slect all ports.
    
    You can also refer to the pic
    
    Hope it helps
    
    Carl
    
    Netgear Employee