NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Netgear GS110TP - Port Mirroring
I have been asked to configure port mirroring on this switch for Call recording on a hosted telephone system. My IT knowledge is limited so please be gentle.
I have a port on the Broadband/Phone ro...
Hi Schumaku,
Thanks for your reply. I am not planning to use G2 for mirroring. That was programmed by trial which I cant delete now. I plan to only mirror G1 to G7
all voice traffic goes through G1 so if i mirror this to G7 (Which is the call recorder) then i should be ok? The customer only has 5 phones so i dont think if all phones were in use then this would be an issue.
Yes, however both g1 and g2 are mirrored to g7 - if there is more data than the one mirror GbE port can take, there will be data loss of course.
In this switch class, only local ports can be mirrored - for most applications that's OK..
Hi Schumaku,
Thanks for your reply. I am not planning to use G2 for mirroring. That was programmed by trial which I cant delete now. I plan to only mirror G1 to G7
all voice traffic goes through G1 so if i mirror this to G7 (Which is the call recorder) then i should be ok? The customer only has 5 phones so i dont think if all phones were in use then this would be an issue.
Just mark the second entry on the left, and use [Delete] should get rid of the entry.AS long this is not enabled, that won't hurt. And no worries, VoIP is not very bandwidth intensive.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
