NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Netgear smart switch VLANS not working
So I just purchased a Netgear Smart Switch. The switch I bought: https://www.netgear.com/support/product/gs108Tv3.aspx I have another dumb switch that it is connected to with a crossover cable. I...
Of course the VLANs work as expected: Each VLAN does make a dedicated network, leaving tiny details like STP and RSTP alone, each behaves like a unmanaged switch for each network.
You need to look into the IPv4 routing, being on an additional fully fledged router, or limited to some extent on the switch itself.
What do you mean exactly by IP4 routing? Like is there a specific setting I should be looking for?
Show us the switch IP config and the VLAN Routing config.
Does your Proxmox network config require a trunk port, so tagged?
Also add the exact switch model and hardware version and the firmware in place.
Shuddering a little bit reading about an unmanaged switch involved here - for what should be dedicated networks and dedicated IP subnetworks.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
