When I am connected to the internet via the GS108PEv3 Switch I am not getting the same speed as I would when I'm close to the router and connected wireless. Could you please help in what i would do Thanks

hshah96, Have you tried to do a factory reset on the GS108PEv3 then reconfigure it from scratch? If yes and still same problem occurs, I advise you to open an online case with NETGEAR Support at anytime for further assistance. State your concern as well as the steps you did to isolate the problem. Regards, DaneA NETGEAR Community Team

Not getting the same speed as wireless when connected to the switch

6 Replies

Replies have been turned off for this discussion

No_Jah
Aspirant
Jan 26, 2017
I think other people are having issues with this particular switch:
https://community.netgear.com/t5/Smart-Plus-Click-Switches/GS108Ev3-Low-Throughput/td-p/501564
- DaneA
  NETGEAR Employee Retired
  Jan 26, 2017
  hshah96,
  
  If there are devices connected to the GS108PEv3 such as PCs, kindly access the web-GUI of the GS108PEv3. Go to System > Management > Port Status. Kindly answer the questions below:
  
  a. What is the Speed of each port where there are devices connected?
  
  b. What is the Linked Speed of each port where there are devices connected?
  
  c. Is Flow Control enabled on the ports where there are devices connected?
  
  d. What is the current firmware version of the GS108PEv3?
  
  e. What is the speed you are getting on your devices if its directly connected to the router or via wireless?
  
  f. What is the speed you are getting on your devices if its directly connected to the GS108PEv3?
  
  Regards,
  
  DaneA
  NETGEAR Community Team
  - hshah96
    Aspirant
    Feb 03, 2017
    
    Hi DaneA
    
    Sorry for the late reply, I've been a bit busy.
    
    a. What is the Speed of each port where there are devices connected?
    100M OR FULL
    b. What is the Linked Speed of each port where there are devices connected?
    100M & 1000M
    c. Is Flow Control enabled on the ports where there are devices connected?
    It is disabled
    d. What is the current firmware version of the GS108PEv3?
    2.00.09
    e. What is the speed you are getting on your devices if its directly connected to the router or via wireless?
    150 Mbps
    f. What is the speed you are getting on your devices if its directly connected to the GS108PEv3?
    35Mbps
    
    Thanks