Routing Between Multiple Subnet

Hi loboexe, 

I'd like to get some update on this.

Thanks,

The second router is configured as my WiFi gateway, any mobile devices (Laptops, mobile phones and my printer) connects to it on 192.168.0.xxx. Its WAN Port is connected to my NetGear switch, and its gateway set to use my ISP router on 192.168.1.xxx.

All other devices in my house (TV's, my PC, my sons MAC, my servers, xbox and several pi's) connect with ethernet (My house is fully cabled) to my LAN via the switch with the gateway being the ISP router also connected to the LAN.

I did this to seperate WifI traffic from LAN traffic so that when I get my firewall inplace all traffic, LAN and WiFi will pass through the firewall.

This is for two reasons, the ISP firewall on the router is "pants" but more specifically if I added my firewall behind my ISP router and still used it for WiFi connection, LAN traffic would pass through my firewall but WiFi traffic would bypass it as it will just pass directly to the router.

By making WiFi connect to a second router I can force all traffic to pass through the firewall as it will sit between the LAN including the WiFi and the ISP that will have its firewall disabled and be acting as a bridge router to the internet only.

Currently :

All WiFi devices can get to the internet, all LAN connected devices can get to the internet.

All WiFi devices can see stuff on my LAN but stuff on my LAN cannot see the WiFi, in particular I want to be able to print from my PC and my sons MAC to the wifi connected printer but I cannot.