NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Switch GS728TPPv2 not working when connected to wireless bridge
Hi all, I tried others forums but to no avail .... we need to switch our security cams to poe system. Since the building is not ours we cannot use utp everywhere. Here is the basic setup of ou...
Welcome to the community! :)
Just to verify. The GT-AX11000 is connected wirelessly to the 1st RT-AC67U then the GS728TPP is connected hardwired to the 1st RT-AC67U, am I right?
What is the IP address set on the devices? Are they all set to static IP Addresses?
Are there VLANs configured in your network setup?
What is the current firmware of the GS728TPP?
Regards,
DaneA
NETGEAR Community Team
Welcome to the community! :)
Just to verify. The GT-AX11000 is connected wirelessly to the 1st RT-AC67U then the GS728TPP is connected hardwired to the 1st RT-AC67U, am I right?
What is the IP address set on the devices? Are they all set to static IP Addresses?
Are there VLANs configured in your network setup?
What is the current firmware of the GS728TPP?
Regards,
DaneA
NETGEAR Community Team
Try one of these:
- Disable STP (or RSTP, or MST) and enable "Forward BPDU while STP Disabled", or
- Enable STP the switch and on all ports and set the prio (aka. Configuration Revision Level ) to 32768.
These typically fix strange issues with consumer style Mesh systems.
Hi DaneA,
Just dropped in to say a BIG THANK YOU! Your First suggestion worked like a charm!!
I had given Up to be honest.
For other users: setup is as described above. All gear has static I.P. and I have no vlans. Firmware Version V6.0.3.3.
Huge thank you again. you saved me a lot of hassle (and my wife a headache from me behaving like a child lol)
Beerke
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
