NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
VLANs and Windows DHCP Server
Current Setup Draytek Vigor router with port 4 connected to port 1 Draytek has two VLANs setup, the default which is untagged is 10.0.0.0/24 and VLAN 20 tagged 172.16.31.0/24 Windows DHCP...
Thank you for your assistance, I found the DHCP server was using another router on the same subnet as the gateway for legacy reasons. It needed a static route to the new Subnet/VLAN, once I added this all was working fine, I confirmed I could ping from the Router interface on the new Subnet to the DHCP server fine and DHCP relay was working fine
To my knowledge, the Netgear Smart switches are just L2 or some L2+ capable, there is no DHCP HELPER available.
Said that, the DHCP server must have a leg in this IP subnet and VLAN.
Thank you for your assistance, I found the DHCP server was using another router on the same subnet as the gateway for legacy reasons. It needed a static route to the new Subnet/VLAN, once I added this all was working fine, I confirmed I could ping from the Router interface on the new Subnet to the DHCP server fine and DHCP relay was working fine
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
