NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
FVS318N VPN Tunnel from Single Endpoint to 2 VLANS
I think I know how to do this, but wanted to confirm before attempting to make the configuration changes. I currently have 1 VLAN on the 318N. This is connected to another VPN router via a site-...
Correct, if what you're doing is looking to add a second subnet to an existing IKE, just add another VPN policy, and select the same IKE policy. I had 4 subnets configured with the same IKE policy from the Netgear to a Cisco ASA5506 with no issues.
EDIT surprised at the response delay here , this is a pretty simple VPN configuration. It's just a single phase 1 installation with multiple phase 2s.....
Hello SamirD,
I cannot confirm since I have not tested it myself (Will probably try on a later time). In theory, this setup should work since they have the same endpoint. The IKE policies will be the same for both VLANs however, I'm thinking this would only use one connection at a time. I'll inquire this one just to make sure.
Thanks,
Yikes! Only one tunnel at a time would be a problem. Let me know what you find out and what a workaround would be (new IKE policy?).
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
