NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

sinman's avatar
sinman
Aspirant
Apr 07, 2017
Solved

fvs336gv3 protocol binding

Hi   I have a dual wan set up WAN1 - Leased line for VoIP WAN2 - ADSL for all other traffic (has high latency)   We have configured Weighted LB, Protocol binding of all SIP traffic to go to WAN...
Troubleshooting
  • DaneA's avatar
    DaneA
    Apr 13, 2017

    Hi sinman,

     

    Welcome to the community! :) 

     

    Let us try this:  kindly remove the protocol binding for the VoIP that is configured then just define an outbound policy for it in the firewall rules and observe.

     

    What is the current firmware version of the FVS336Gv3?  

     

     

    Regards,

     

    DaneA

    NETGEAR Community Team

sinman's avatar
sinman
Aspirant
Apr 13, 2017

Hi DaneA

 

Thanks for the welcome :-)

 

 

Am I correct in thinking that the WAN users IP is the destination (SIP server) and the NAT IP should be the WAN connection I want it routed via (WAN1)?

I will give this a shot and report back

 

Firmware is: 4.3.3-6

 

Thank you for your help, I really appreciate it

Thanks

Simon

DaneA's avatar
DaneA
NETGEAR Employee Retired
Apr 26, 2017

@sinman,

 

I just want to follow-up.  Were you able to try my suggestion?  If yes, what is the result?

 

Also, I suggest that you to upgrade the firmware of the FVS336Gv3 to v4.3.5-3 then perform a factory reset on it.  Afterwards, reconfigure it from scratch in order to start clean using the latest firmware version.  You may download firmware v4.3.5-3 here.

 

 

Regards,

 

DaneA
NETGEAR Community Team

  • DaneA's avatar
    DaneA
    NETGEAR Employee Retired
    May 01, 2017

    @sinman,

     

    I just want to follow-up on this again.  We’d greatly appreciate your feedback.

     

     

    Regards,

     

    DaneA

    NETGEAR Community Team

  • sinman's avatar
    sinman
    Aspirant
    May 02, 2017

    Hi DaneA

     

    Thank you for your help.

    I haven't yet had an opportunity to upgrade the firmware. But changing the to using an outbound rule worked a treat.

     

    Thanks
    Simon

NETGEAR Academy

Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology! 

Join Us!

ProSupport for Business

Comprehensive support plans for maximum network uptime and business peace of mind.

 

Learn More