NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Fvx538
I have a FVX538 which was shelved for many years because we had a new FW from the provider. However we switched providers and I had to pull it off the shelf to use. I updated the firmware successfully...
I've made progress.
My logs are now showing a lot of different results and I've getting further. The manual has made a difference when I 'manually configured the client' but I'm still missing something.
Log from client
[VPNCONF] TGBIKE_STARTED received
20150608 22:25:13 Reading configuration...
20150608 22:25:14 IKEv1 configuration detected
20150608 22:25:14 No IKEv2 configuration
20150608 22:25:14 No SSL configuration
20150608 22:25:41:819 Default (SA Gateway-P1) SEND phase 1 Aggressive Mode [SA] [KEY_EXCH] [NONCE] [ID] [VID] [VID] [VID] [VID] [VID]
20150608 22:25:46:842 Default (SA Gateway-P1) SEND phase 1 Aggressive Mode [SA] [KEY_EXCH] [NONCE] [ID] [VID] [VID] [VID] [VID] [VID]
20150608 22:25:51:865 Default (SA Gateway-P1) SEND phase 1 Aggressive Mode [SA] [KEY_EXCH] [NONCE] [ID] [VID] [VID] [VID] [VID] [VID]
20150608 22:27:00:870 Default (SA Gateway-P1) SEND phase 1 Aggressive Mode [SA] [KEY_EXCH] [NONCE] [ID] [VID] [VID] [VID] [VID] [VID]
Log from FW (VPN LOG)
2015 Jun 8 20:14:14 [FVX538] [IKE] Could not find configuration for xxx.xx.xx.xxx[500]_
When I used the manual configuration I made the most progress. The Wizard and the non-manual settings from the instruction guide did nothing for me.
Is there supposed to be a Phase 1 and Phase 2 cfg? I recall the older version of the client having this already built in to the cfg.
My logs are now showing a lot of different results and I've getting further. The manual has made a difference when I 'manually configured the client' but I'm still missing something.
Log from client
[VPNCONF] TGBIKE_STARTED received
20150608 22:25:13 Reading configuration...
20150608 22:25:14 IKEv1 configuration detected
20150608 22:25:14 No IKEv2 configuration
20150608 22:25:14 No SSL configuration
20150608 22:25:41:819 Default (SA Gateway-P1) SEND phase 1 Aggressive Mode [SA] [KEY_EXCH] [NONCE] [ID] [VID] [VID] [VID] [VID] [VID]
20150608 22:25:46:842 Default (SA Gateway-P1) SEND phase 1 Aggressive Mode [SA] [KEY_EXCH] [NONCE] [ID] [VID] [VID] [VID] [VID] [VID]
20150608 22:25:51:865 Default (SA Gateway-P1) SEND phase 1 Aggressive Mode [SA] [KEY_EXCH] [NONCE] [ID] [VID] [VID] [VID] [VID] [VID]
20150608 22:27:00:870 Default (SA Gateway-P1) SEND phase 1 Aggressive Mode [SA] [KEY_EXCH] [NONCE] [ID] [VID] [VID] [VID] [VID] [VID]
Log from FW (VPN LOG)
2015 Jun 8 20:14:14 [FVX538] [IKE] Could not find configuration for xxx.xx.xx.xxx[500]_
When I used the manual configuration I made the most progress. The Wizard and the non-manual settings from the instruction guide did nothing for me.
Is there supposed to be a Phase 1 and Phase 2 cfg? I recall the older version of the client having this already built in to the cfg.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
