NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Port Forwarding
260/5000 Good morning I have a problem with the SRX5308. I can not connect to RDP, VNC & ... via WAN. Simply redirecting ports does not work. Apparently I'm doing some...
- 230/5000Problem solved
Incorrect port translation was performed.
It should be done exactly on the reverse. As a service port we add port 10006, but we translate it into a 3389 rule, ie RDP port.
The previous router was suggested
Hi Andrzej000,
Welcome to the community! :)
Was this working fine before?
Kindly access the online port scanner here then check if ports 3389 and 5900 is really opened. If it shows "online/reachable!" it means that the port is really opened.
Regards,
DaneA
NETGEAR Community Team
Good morning
Thank you for the quick reply.
These ports on the devices are active.
I connect to the devices (on the 5900 and rdp standard port 3389) without problem locally or through the WAN but the old router (Intellinet).
Port scan on the WAN side of the SRX5308 router (http://www.t1shopper.com/tools/port-scan/)- no ports open.
On the WAN side, I think it should be open ports that redirect traffic from ports 5900 ie in my case eg 10006.
I connect seamlessly through WAN to the router (using https: //) to manage it.
Since this location has two links to the other one, the other router is connected all the time and through it I have access to the local network. And I also manage roter SRX3508 through local network.
I do not quite know where to look for a solution to the problem.
With this router I have contact only for the first time so probably somewhere I make an error.
If I could pinpoint an error, I can share other current settings.
Regards
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
