NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Prosafe FVS318GV2
Hoping someone can assist with an issue I am having with a Prosave VPN firewall. For LAN TO WAN traffic I have some rules that allow traffic to specific destinations to a specific port. The Default O...
Hi SatcomGlobal,
Welcome to the community! :)
As far as I have checked, there is no issue logged for the FVS318Gv2 as per described in your initial post. Let us isolate the problem. Kindly answer the questions below:
a. How did you ran the netflow test?
b. Kindly try to change the Default Outbound Policy to Allow Always then click Apply. Then, change again the Default Outbound Policy to Block Always then click Apply. Does same problem occur?
c. What is the current firmware version of the FVS318Gv2? If ever its not yet the latest version, I suggest you to upgrade the firmware to v4.3.5-3. You can download it here. Be reminded to perform a factory reset on the FVS318Gv2 after upgrading the firmware then reconfigure the setting from scratch to start clean using the latest firmware version.
Regards,
DaneA
NETGEAR Community Team
I just want to follow-up on this. We’d greatly appreciate your feedback.
Regards,
DaneA
NETGEAR Community Team
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
