Forum Discussion

Aspirant

Jul 29, 2016

Solved

FVS318Gv2 - L2TP/IPsec Server

Hi,

I have got a router "NETGEAR ProSafe™ Gigabit 8 Port VPN Firewall FVS318Gv2" and I try to configure the L2TP VPN Server.

I have try to configure like this :

And like this :

And when i try to connect from windows I have the next error, in french sorry :

And when i check the router log i have the next error :

Fri Jul 29 08:38:07 2016 (GMT +0200): [FVS318Gv2] [IKE] ERROR: Failed to get IPsec SA configuration for: 175.28.x.x/32[42246]<->192.168.x.x/32[42246] from 192.168.x.x/32
Fri Jul 29 08:38:07 2016 (GMT +0200): [FVS318Gv2] [IKE] INFO: Responding to new phase 2 negotiation: 175.28.x.x[0]<=>192.168.x.x[0]

Do you know what is wrong ?

Regards,
LaNceLoT

Troubleshooting

oLaNceLoTo
Aug 06, 2016
The problam was that I have tested the VPN from my local LAN and it does not work in this configuration.

When I have tested it from a external computer it has work.

13 Replies

JohnRo
NETGEAR Employee Retired
Jul 29, 2016
Hello oLaNceLoTo,

Welcome to the community!

Have you tried following the instructions on this KB Link? If not, please check the example posted on the page. I also would like to know what operating system you are using.

Thanks,
- oLaNceLoTo
  Aspirant
  Jul 29, 2016
  I have follow this all step before poting.
  
  L2TP server is enable with a good range and I have put a user to L2TP Users.
  
  I try to connect from a windows 7 and a windows 10.
  
  Regards.
  LaNceLoT
  - JohnRo
    NETGEAR Employee Retired
    Jul 29, 2016
    Hello oLaNceLoTo,
    
    Please see this thread. One of our community members did additional changes on the PC and was successful. Other member have confirmed that it had worked on their side as well.
    
    Thanks,