NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
SRX5308 Unable to setup second WAN connection
Hi, In my company we have the SRX5308 with WAN1 configured as: IPV4 Static IP and it is working just fine (The VDSL is a modem/router configured as dailer and one port connected to the netgear w...
Hi shlomim,
You're welcome! :) I am glad that its all sorted out.
Since your concern has been resolved, I encourage you to mark the appropriate reply as the “Accepted Solution” so others can be confident in benefiting from the solution. The NETGEAR Community looks forward to hearing from you and being a helpful resource in the future!
Cheers,DaneA
NETGEAR Community Team
Hi shlomim,
Welcome to the community! :)
Since WAN 1 port is working fine with the VDSL connection as you have mentioned, what if you try to set it on WAN 2 port (or WAN 3 & WAN 4 ports). Then, set WAN 1 port (or WAN 3 & WAN 4 ports) for the new VDSL modem in order to isolate the problem. Let us know the results.
Regards,
DaneA
NETGEAR Community Team
Hi,
Thanks for your response.
It seems like it was my misunderstanding, When selecting Primary WAN Mode as WAN1 and Auto Rollover fr the scond WAN, it causes only 1 WAN to be connected.
I thought that both of them will always be connected and only if WAN1 will disconnect the traffic will go throw the second WAN.
Thanks for your help!
Hi shlomim,
You're welcome! :) I am glad that its all sorted out.
Since your concern has been resolved, I encourage you to mark the appropriate reply as the “Accepted Solution” so others can be confident in benefiting from the solution. The NETGEAR Community looks forward to hearing from you and being a helpful resource in the future!
Cheers,DaneA
NETGEAR Community Team
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
