NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Help understanding the "Set the 802.1Q VLAN and management VLAN" WBE750
On my router I have a X550 interface tagged with a vlan ID of "4" which attaches to my switch port as a "trunk port with a vlan id of "4"" on the switch I have an "access Port with a vlan id of "4" t...
In the LAN settings of the WBE750 Do I place the vlan id of 4 in the "Untagged VLAN" setting or the "Managed VLAN" setting.
Not sure what you are trying to achieve. Is all the traffic running through the AP on VLAN 4?
Assuming yes: Access ports are not tagged - the router and switches will add the tags when sending packets on the trunks. So I don't think you need to configure the VLAN on the AP at all.
If no: Then the router switch port going to the AP should be a trunk. The VLAN settings on both the router and the AP depend on the details of what you are wanting to achieve.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
