Netgear WAX202 Router on AP mode showing devices on connected WAN router

---

a1chin wrote:

The issue is I can see all the other devices connected to my BT Smart Hub 2 router.

I have the Netgear WAX202 connected to the BT Smart Hub 2 router via a Cat6 Ethernet cable attached to the WAN port on the back.

---

Absolutely nothing wrong. All devices are connected to the very same L2 network. The WAX202 will "see" the MAC addresses of all devices, regardless of where these are connected. The WAX202 will show these as connecd (=reachable)  via the WAX WAN interface, The Smart Hub 2 will show also devices connected direct to the wax202 in AP mode as LAN connected devices.