NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
WAX220 WPA2-Enterprise help with VLAN?
I have 3 WiFi networks configured like so: ESSID_1 - 5gz only - WPA2-Personal - VLAN 101 ESSID_2 - 2.4ghz only - WPA2-Personal - VLAN 107 ESSID_3 - 2.4ghz and 5ghz - WPA2-Personal + fast roamin...
This is the only packet that I see over the wire on vlan 107 when I attempt to auth WPA2-Enterprise
Nothing seen over vlan 101 (the WAX220's configured management vlan)
# tcpdump -vvXXeni igb2 'vlan 107 && not ip6'
tcpdump: listening on igb2, link-type EN10MB (Ethernet), capture size 262144 bytes
16:26:42.156219 12:31:1d:08:d4:75 > ff:ff:ff:ff:ff:ff, ethertype 802.1Q (0x8100), length 60: vlan 107, p 0, LLC, dsap Null (0x00) Individual, ssap Null (0x00) Response, ctrl 0xaf: Unnumbered, xid, Flags [Response], length 42: 01 02
0x0000: ffff ffff ffff 1231 1d08 d475 8100 006b .......1...u...k
0x0010: 0006 0001 af81 0102 0000 0000 0000 0000 ................
0x0020: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0030: 0000 0000 0000 0000 0000 0000 ............
Don't know what to make of this.
The firmware apparently doesn't work with WPA2-Enterprise and VLANs? Is my configuration incorrect or have I purchased a business product that doesn't do business?
Looks like the RADIUS traffic supposed to be directed the management VLAN goes massively wrong.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
