NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
WAX615 initial start up Issue
I am installing an access point (WAX615) and trying this for the first time. I am setting this up in Stand Alone Mode. After powering up, getting on the access point's SSID, and logging in, the acc...
Hello,
Thank for contacting Netgear community forum.
Below is the Led light status meaning.
Power / Cloud: solid Green --> WAX615 booted up successfully.
LAN: Blinking Amber quickly --> Traffic activity at a speed lower than 2.5 Gbps is
detected on the LAN port.
2.4Ghz: solid green --> No clients are connected to 2.4Ghz SSID
5Ghz: blinking Blue quickly --> Clients are connected to 5Ghz SSID.
We need couple thing to understand your issue.
1. Try refreshing the page and make sure you are connected to AP's NETGEARxxxxxx-SETUP SSID
2. We are assuming WAX615 is in Day zero page -- Applying settings, it means you have changed default SSID to your personal SSID.
Connect your laptop or phone to newly configured SSID and browse for http://aplogin.net. it will redirect to Ap login page.
Your browser might display a security warning because of the self-signed certificate.
on the access point, which is expected behavior.
3. If above things didn't work, please share your network topology, Will come back with more details.
Hi JMart_0001
Are there any updates?
If still facing any issues, please reach to Netgear community forum.
Thanks,
Basu
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
