NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Orbi pro wifi 6 (SXK80) can't do separate vlans in ap mode
I have installed the Orbi Pro Wifi 6 systems and have them in AP mode. I tried following or using the below solution as the mechanism to take/use the existing VLANs on my network. https://communi...
Conclude, all the standard DHCP tasks are never forwarded accordingly to the appropriate VLAN when I get you right. Should not be a difficult thing for a software acceptance test 8-/
- DHCPDISCOVER: broadcast request to all DHCP in the network
- DHCPOFFER: answer to the DHCPDISCOVER
- DHCPREQUEST: from the client to the DHCP server, requesting IP or lease extension
- DHCPACK: acknowledged DHCP requests or DHCPINFORM requests
- DHCPNAK: refused DHCPREQUEST by the DHCP server
- DHCPDECLINE: ...
- DHCPRELEASE: ...
- DHCPINFORM: ...
Hi secdoc ,
Please refere below community link it may help you to configure vlans and port configurations.
Thanks,
Basavaraj
Dear BasuKhodanapur
As discussed and explained by the OP before, it appears the DHCP does not work when the data is flowing over the Orbi Pro 6 tagged VLAN, e.g. in the case it's configured as a trunk for the VLAN.in question.
Regards,
-Kurt
oes th
BasuKhodanapur wrote:Hi secdoc ,
Please refere below community link it may help you to configure vlans and port configurations.
Thanks,
Basavaraj
Does the Native VLAN have to be VLAN 1?
Hi secdoc ,
Yes configure default management vlan1 as 1 and configure management port as a untagged port and other vlan ports as tagged port.
It will resolve the case.
Thanks,
Basavaraj
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
