NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
SXR50 Tagged VLAN goup on WAN
Hello all, I would like to make a tagged VLAN group on the WAN port (ID 4 and 6, per requirement of ISP, 4 = IPTV and 6 = Internet). This would result in the eth0.4 and eth0.6 interfaces. I have ...
1. Assume port 1 is WAN. Port 2 is connected with IPTV device
2. Assign a profile with VID=6 to port 1.
3. Assign "IPTV" profile with VID=4 to port 2
So, internally Port 1 and Port 2 will be added to the same bridge. Other port will be in LAN bridge.
Check if that works.
Assigning VLAN4 to port 2 will not work since the IPTV box should be in the same network as it also requires internet access. Furthermore the ISP does not allow bridged IPTV.
Hi
We are internally discussing. If you have a network topology diagram, that would help us understand better. will get back to you.
Bruce
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
