NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
VLAN Configuration when you have a Switch in your Network?
Hi I have the SXK80 Router and Ethernet Port 1 is connected to Modem(Internet) which has default VLAN 1 assigned and Ethernet Port 2 is connected to a 4 port switch and configured to VLAN 2. Port 3...
Hi NemoNeil,
Just would like to clarify regarding the inter-VLAN routing on the SXR80.
All VLANs should be able to communicate if network isolation is disabled for all VLANs, please see screenshot below:
Now, when network isolation of any of the VLANs are enabled, those cannot communicate with the other VLANs on the network anymore.
Adding to that, the Orbi Pro only does port-based VLANs and not 802.1Q VLANs.
Apologies on my previous reply as it was vague and I hope this clarifies it.
Please let us know if you have further concerns.
Regards,
JeraldM
NETGEAR Community Team
JeraldM wrote:Hi NemoNeil,
Just would like to clarify regarding the inter-VLAN routing on the SXR80.
All VLANs should be able to communicate if network isolation is disabled for all VLANs, please see screenshot below:
Now, when network isolation of any of the VLANs are enabled, those cannot communicate with the other VLANs on the network anymore.
Regards,
JeraldM
NETGEAR Community Team
Hi JeraldM,
Today I created a wireless and LAN VLAN, and moved all my cameras to an IoT VLAN, (192.168.30.1). I unchecked both client and network isolation, under Advanced Settings/VLAN / Bridge Settings. However, I could never bring up the cameras from the default VLAN.
I also discovered that none of the cameras are reachable from the WIFI network related to the IoT VLAN, (192.168.30.1). Any input would be appreciated. I am on the beta 4.2.1.106, which may be my issue.
Hi Mstrbig,
Just to clarify, the cameras cannot establish a connection whenever they're connected to the default VLAN or the IoT VLAN?
If that would be the case, did this issue occur when you updated the system with the beta FW?
Regards,
JeraldM
NETGEAR Community Team
JeraldM wrote:Hi Mstrbig,
Just to clarify, the cameras cannot establish a connection whenever they're connected to the default VLAN or the IoT VLAN?
If that would be the case, did this issue occur when you updated the system with the beta FW?
Regards,
JeraldM
NETGEAR Community Team
IoT VLAN. No, I had the same issue before the beta. All other devices work great. All Echo devices, 3rd party smart devices, TVs, Amps, Lights, etc. However, the cameras show up in the GUI with the proper IP address and good signal, but will not produce video on any PC, App, etc. I tried to achieve it on multiple WIFI networks and hard line.
Hi Mstrbig,
Just would like to add a couple of questions:
- Are the cameras only on the IoT VLAN? That is, are the other devices you mentioned on another VLAN or also on the IoT VLAN?
- What happens when we move one of the cameras to one of the other VLAN profiles or even the default one? Are you able to ping that camera?
- What brand is the camera?
- Have you also tried unchecking Disable IGMP Proxying located on ADVANCED > Setup > WAN Setup?
Regards,
JeraldM
NETGEAR Community Team
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
