NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
SXK80 Connected device type listing
Reaching out to the community on the recent Orbi Pro AX setup using FW 3.1.1.102. I've had great success configuring and setting up the units. VLANS for my purposes have worked successfully. The one item I've noticed is around the access control being enabled or disabled and the proper connection type under connected devices.
If access control is disabled the connected devices properly display the connection type (wired/wireless) If access control is enabled the connected devices do not properly display connection type.
Thoughts?
2 Replies
Hi computim
Welcome to the Netgear Community. Could you please share the debug log?
Go to https://<ip address of SXR80>/debug.htm
Click on start capture.
Recreate your issue before saving the debug logs.
Upload into one drive or google drive and send me link via PM. We will analyze your issue.
Thanks,
Raghu
Unfortunately after enabling the access control feature im unable to show a screen shot of the proper connected device types. Many of the wireless device display as connected via wired. Ring Pro doorbell displayes as a wired device vs a wireless device. I can certainly show that but can not go back and display when it was displaying as wireless prior to enabling access control.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
