NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
SXK80: mDNS not working as intended across VLAN
Using a previous thread as a guide (https://community.netgear.com/t5/Orbi-Pro-WiFi-for-Small-Business/SXK80-Allow-Specific-Client-s-across-VLAN/m-p/2160469) I've been unsuccessful in getting this to ...
No resolution whatsoever despite even resetting my network and starting setup and config from scratch. The thought of having to do this once again as another attempt of troubleshooting is exhausting given the amount of time I takes to setup these systems. I’ve had to move certain devices over to another VLAN in order to access and communicate with it successfully. I setup syslog, monitoring the activity, and it appears that rules are attempting to route but nothing happens in actuality. It’s really disappointing this doesn’t work out of box or after reconfiguring considering the cost of this system. I’ve pretty much lost hope of this fixing itself through a software update as well. Sorry I couldn’t have been of any help.
Having the same frustrations with my SXR50 system. mDNS does not work.
- I have 3 satellites.
- 4 VLANs
- Default(1), Network Isolation
- Family(20), Network Isolation
- IoT(30), Client and Network Isolation
- Guest(40), Network Isolation
- The printer is on the Guest VLAN (40)
- I'm wanting to print from the Default and Family VLANs
- 4 policies set up for mDNS
- Printers, Source VLAN = 40, Destination = 20
- Printers, Source VLAN = 20, Destination = 40
- Printers, Source VLAN = 40, Destination = 1
- Printers, Source VLAN = 1, Destination = 20
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
