NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

israelisraeli's avatar
israelisraeli
Aspirant
May 07, 2016

Passive FTP configitation (VEGN 2610)

I'm trying to set up an FTP server located at a NAS on my LAN.

Iv'e set port forwording for the data chanel and the passive command chanel (passive range) but it seems that there's still a problem with my configiration.

i can acsses the server using it's local IP inside the LAN (but not by public IP).

 

her's a link to screenshots of all the relevent configorations on the NAS and on the router

 

 

does anyone have an idea of what could go wrong?

thanks for the help!

Genie

3 Replies

    • israelisraeli's avatar
      israelisraeli
      Aspirant
      May 07, 2016

      yes, with netgear's pre-made setting (which are simply TCP 20-21). you can the screenoshots in the original post

      • TheEther's avatar
        TheEther
        Guru
        May 08, 2016

        If your public IP really public?  Does it start with 192.168.x.x, 172.16.x.x, 10.x.x.x or 100.x.x.x?