NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

MJoplin's avatar
MJoplin
Aspirant
Mar 30, 2020

I increased my ISP speeds - when I speed test from the Router I get good results, My Cat 5e Ethernet

I pay for a pretty decent speed from my ISP (just bumped it up).  When I do a speed test from the Router, I get the full 20MB speed however, my laptop which is connected via Ethernet 5e cable still only gets 3-4 MB/s.  There must be some configuration within my Nighthawk Triband R8000 on the latest firmware that let's open the throttle on wired Ethernet and let it do better.  Help?

6 Replies

  • plemans's avatar
    plemans
    Guru - Experienced User

    did you setup qos on the R8000P? 

    I've heard of prior settings being retained even through a reboot. 

    Have you tried a simple factory reset and re-install?

    • MJoplin's avatar
      MJoplin
      Aspirant
      Yes, I set QoS. Should I not have? I'm trying to attain fast enough signal to sustain VoIP to my remote office over VPN.
      • plemans's avatar
        plemans
        Guru - Experienced User

        what modem are you using? 

        have you tried a reset and re-install?