There we go.

You have a ton of Correctables and Un-correctables that should all be zeros. Modem is seeing problems on the ISP side.

Have the ISP check the signal and line quality UP to the modem. Be sure the ISP provisions the modem correctly.

Be sure there are no coax cable line splitters in the between the modem and ISP service box.
Be sure your using good quality RG6 coax cable up to the modem.
Start with removing any amplifiers, signal attenuators, or splitters from the coax.
From there check the line for kinks, damage, moisture in the line.
Check the connectors for improperly made ends, foil touching the copper coax line, loose connections, bad/old/cheap connectors, or corroded connections. Replace them if you do.
Be sure to power OFF the modem for 1 minute then back ON.
https://community.netgear.com/t5/Cable-Modems-Routers/General-info-and-Troubleshooting-for-Cable-Modems/m-p/1530376#M12853
https://kb.netgear.com/24311/Power-level-guidelines-for-a-NETGEAR-cable-modem-router
https://www.duckware.com/tech/solving-intermittent-cable-modem-issues.html

I've past your debug logs on to NG as well for review.

Forum Discussion

NOTICE: New - RBK750/850/860 Firmware Version 7.2.8.2 Released