NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

TheDood's avatar
TheDood
Follower
Jul 21, 2022
Solved

RBR750 RBS750 Satellites will not sync

2 RBS750 satellites both went offline and then would not sync back to the RBR750 router. After performing all the troubleshooting steps (factory resets, connnecting to satellites via ether, syncs, etc) and spending 3+ total hours with support they could not figure it out and they granted an RMA for the satellites. I did not want to give up so I did more digging and found that there is a newer firmware for the router than what the web GUI says is the "latest". I found this firmware available for download, which at this time is not the latest according to the RBR750 Web gui when you "check" for new firmware:

RBR750-V4.6.8.5_2.1.9.chk

 

https://www.netgear.com/support/download/?model=RBR750&_ga=2.213679120.549171019.1658349964-1063581468.1657642771

 

I then manually uploaded this to my RBR750 router via the web gui and 1 of my RBS750 satellites connected within minutes. My 2nd satellite was not powered up so I then powered it on and did a sync by pushing sync on RBS750 satellite and then using the RBR750 router web gui sync button.

 

And there you have it. Check for latest firmware that may not be available for download/auto update on your RBR7540 router.

 

Hope this helps

 

Firmware Version
V4.6.8.5_2.1.9.

1 Reply