RBR850 showing 2 domains out of the box

Question

Just installed RBR850 / (2) RBS850 and seeing 2 IP strings under Attached Devices including 192.168.1.xx and 192.168.2.xx. The router was configured for DHCP. Called Netgear support who suggested changing the channel for the main network (I assume to test that it can support a change). Upon doing so the main network never recovered while the Guest network is the only functioning connection to the router. I am unable to access the admin screen to login from App or web browser on either 192.168.2.1 / 192.168.1.1. Any suggestions?

FURRYe38 · Answer

Please post a screen capture of what your seeing. Use the Choose File button on your next post.&nbsp;
&nbsp;
192.168.1.1 is for the main netowrk. 192.168.2.1 is for Guest WiFi Network.&nbsp;

t_tr · Answer

Unfortunately, I cannot login to do a screen capture.

t_tr · Answer

I was hoping to not have to reset to factory defaults but i dont see a path forward without it. Please let me know if there is an alternative. If not, thanks for taking the time to assist me here.&nbsp;

FURRYe38 · Answer

RBRs web page is at 192.168.1.1 unless you have a upstream router infront of it using 192.168.1.1 then the RBR will auto change to 10.0.0.1.&nbsp;
&nbsp;
What Firmware version is currently loaded?What is the Mfr and model# of the Internet Service Providers modem/ONT the NG router is connected too?
&nbsp;
Do this, disconnect the RBR from the host router or ISP Modem/ONT.&nbsp;
Press the reset button in back for 15 seconds then release.&nbsp;
With 1 wired PC connected to the RBR, after the front LED pulsates WHITE, with a web browser access 192.168.1.1.&nbsp;

t_tr · Answer

FURRYe38I followed your instructions and identified a few issues along the way. First is that changing the 5 GHz channel from 48 to 44 causes my router to crash and requires a reset to factory defaults to recover. The other item is that i was previously using similar main and guest account SSID's. For example, bobs-truck and bobs-truck-g. This seems to cause inconsistencies with the guest network showing up as bobs-truck-g AND Netgear-guest, both accepting the same password. Multiple devices saw both until I changed the guest network SSID to something completely different.&nbsp;Looks like my router is running v4.6.3.16_2.0.51 and no newer firmware appears to be available for download.I dont have a modem I can access. My router connects via Cat5e to the fiber from the service provider.

Forum Discussion

RBR850 showing 2 domains out of the box

10 Replies