NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
RBR850 system with 4 satellites—New modem
I have been advised by Xfinity to replace my current Arris SB8200 modem with the Arris S33 modem due to an increase in the speed of my service.
I am not adept at all with new technology and would appreciate any information as to the steps I will need to follow to accomplish this with the least amount of disruption. I presently have a CAT 8 cable between my present modem and the RBR850 router.
Thanks in advance for your assistance,
Michael
After new modem is online and working, Power cycle the modem OFF along with the RBR850 for 1 minute, connect the RBR to the new modem and power ON the modem. After 30 seconds after the modem has been turned on. Power ON the RBR. If all is good on the modem, the RBRs front LED should blink WHITE then front LED should turn OFF. Meaning good connection and internet service from the modem.
5 Replies
After new modem is online and working, Power cycle the modem OFF along with the RBR850 for 1 minute, connect the RBR to the new modem and power ON the modem. After 30 seconds after the modem has been turned on. Power ON the RBR. If all is good on the modem, the RBRs front LED should blink WHITE then front LED should turn OFF. Meaning good connection and internet service from the modem.