NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Orbi 970 FW 9.13.1.2 - IPv6 LAN Issues
FURRYe38, BedfordHome, donawalt (tagged you all because I wanted to provide an update on my system/setup/internet). I’ve had a lot going on this year, so had to put this on the back burner for a b...
Without a delegated /56, Orbi cannot assign additional /64s to LAN clients. So your devices get an address (likely via temporary leftover routes), but IPv6 routing is broken or incomplete, which is why websites fail to load.
Now, from Starlink’s website:
Starlink will allocate:
- One public IPv4 address for the customer’s wide area network (WAN), provisioned via Dynamic Host Configuration Protocol (DHCP) for routers/firewalls using IPv4.
- One IPv6 /64 prefix for the customer’s wide area network (WAN), provisioned via Stateless Address Auto Configuration (SLAAC) for routers/firewalls using IPv6.
- One IPv6 /56 prefix for the customer’s local area network (LAN), provisioned to routers capable of issuing a DHCPv6-PD request.
Freaking Netgear, here we go again! Fix… your… firmware… again!