RBE771: 6th wired satellite missing / 5th Config Sync

Thank you for your reply.

I have not yet tested one satellite using wireless backhaul while leaving the other five wired, but I can do so if you think it would help.

The satellites are connected through Netgear MS308 unmanaged 2.5 GbE switches in a star topology. There are no managed switches.

The router and all six satellites are running firmware V10.5.20.10.

The house is approximately 7,500 square feet over three floors.

I performed additional testing:

• With 4 wired satellites, all show as Wired / Good.

• With 5 wired satellites, all show as Wired / Good.

• After adding the 6th wired satellite, one satellite changes to Wired / Config Sync and the 6th satellite does not appear on the Attached Devices page.

• The Firmware Update page still lists all 6 satellites.

The network itself works normally. Wi-Fi speeds remain around 1 Gbps, roaming works correctly, and the 6th satellite improves coverage in its area.

Please let me know if you would like me to perform additional tests.

Thank you.