RBE970 and Satellites Rebooting Randomly?

Well when using Static IP addresses, they should be out side of the host routers DHCP IP address pool and set ON the device, and no IP address reservations should be set on the host router, you can't do both at the same time. RBS would need to be dynamic and let them get an IP address inside the DHCP IP address pool on the host router, .125 to .175. 

Seems like there maybe a configuration issue here that maybe causing problems, that I'm hoping we can help with. So yes, please try the alternative Static IP address on the RBR.

The Not Recommended text is mostly for the inexperienced user which may not fully understand how to setup a Static IP address configuration on Orbi systems and for ease of setup for those users, Dynamic is recommended. I've been using Static for years with out issues with Orbi systems. One reason is that the IP address I need to get to the RBR remains the same vs Dynamic, could change at the host router. 

I have all logs enabled on mine accept for VPN. 

Also check the system uptime on the RBRs debug page to compare with with what is seen on the RBR main web page under Advanced tab/Show Stats. Look at the WAN port and it's UpTime there. They should match if the RBR is truely rebooting. If the WAN port up time is shorter than the debug system uptime, then the RBR isn't crashing or rebooting, the WAN port is going up and down. Something I've noticed that if you happen to disconnect or reboot the ISP modem or host router, the WAN port up time resets, but the system uptime remains running and doesn't reset in this condition.  We'll need to check and compare these.